Description
Kirby Commutator Grinding Stone – For Cleaning and Polishing the Commutator
The Kirby Commutator Grinding Stone is a specially designed abrasive stone for accurately cleaning, grinding and polishing the commutator of the Kirby motor armature. Made from high-quality silicon carbide, this fine grinding stone helps remove carbon deposits, minor surface irregularities and burnt-on residues. As a result, it promotes good electrical contact between the commutator and the carbon brushes.
Why is the Kirby Commutator Grinding Stone Important?

During operation of your Kirby vacuum cleaner, the carbon brushes remain in constant contact with the copper segments of the commutator. Because Kirby carbon brushes are made from electrographite, graphite residues and carbon deposits can gradually accumulate over time.
These deposits may interfere with electrical conductivity, resulting in excessive sparking, reduced motor performance and uneven wear. Therefore, it is important to carefully inspect the commutator when replacing the carbon brushes and clean it whenever necessary.
With the Kirby Commutator Grinding Stone, you can remove light contamination and minor surface imperfections. Furthermore, a clean and smooth contact surface helps prevent premature wear of newly installed carbon brushes.
Benefits of Grinding and Polishing the Commutator
Proper commutator maintenance offers several important benefits:
- Removal of carbon deposits: Removes embedded graphite residues and dirt from the copper segments, thereby improving electrical conductivity.
- Reduction of excessive sparking: A clean and smooth contact surface promotes consistent electrical current transfer between the carbon brushes and the commutator.
- Removal of minor burn marks: Superficial burn marks can be reduced or removed, helping restore proper electrical contact.
- Reduced carbon brush wear: A properly maintained commutator helps minimise uneven and premature wear of the carbon brushes.
- Improved motor performance: Reliable electrical contact contributes to the efficient operation of the Kirby vacuum cleaner motor.
How to Grind/Polish with a Kirby Commutator Stone
The Kirby Commutator Stone is specially designed for cleaning and polishing the commutator of the Kirby motor armature. Hold the grinding stone at an angle of approximately 60 degrees to the commutator. While the motor is running, allow the stone to rest lightly against the surface for approximately one minute, without applying additional pressure. This helps remove carbon deposits and minor surface irregularities, improving contact with the carbon brushes.
Warning – Safety: Working with rotating motor components involves serious risks. Always exercise extreme caution and avoid contact with rotating or live electrical parts.
Kirby Commutator Grinding Stone Made from High-Quality Silicon Carbide
This grinding stone is manufactured from fine-grain silicon carbide and features a flat, rectangular design. Thanks to its dimensions of 6 × 12 × 150 mm, it is particularly suitable for precise maintenance work on the commutator.
In addition, its fine abrasive structure allows controlled surface treatment when used correctly. Consequently, this tool is especially suitable for maintenance and repair work on Kirby electric motors.
Important When Replacing Kirby Carbon Brushes
When installing new carbon brushes, the copper commutator segments must be clean and free from harmful deposits. Remaining graphite residues and surface irregularities can cause inconsistent electrical contact and accelerated brush wear.
Therefore, always inspect the condition of the commutator before installing new carbon brushes. If deep burn marks, significant out-of-roundness or protruding mica insulation are present, additional professional machining or replacement of the armature may be required. A grinding stone alone cannot always repair these types of damage.
Here you can find Kirby Carbon Brushes (Set of 2) and Kirby Carbon Brushes with Holders (Set of 2).
Warning When Using the Kirby Commutator Grinding Stone

Never use ordinary sandpaper or an unsuitable grinding stone!
Incorrect abrasive materials may leave abrasive particles behind, damage the copper commutator segments and significantly reduce the service life of the motor armature.
Therefore, always use a suitable, fine-grained and porous commutator grinding stone. Furthermore, the grinding procedure must be carried out using the correct technical method to prevent unnecessary damage to the commutator.
Technical Specifications
- Product: Kirby Commutator Grinding Stone
- Material: Silicon Carbide
- Dimensions: 6 × 12 × 150 mm
- Shape: Flat, Rectangular
- Application: Cleaning, Grinding and Polishing
- Component: Kirby Motor Armature Commutator
- Use: Motor Maintenance and Repair
The Kirby Commutator Grinding Stone is therefore a practical tool for maintaining the commutator and promoting the reliable and efficient operation of your Kirby vacuum cleaner motor.












Reviews
There are no reviews yet.